Transfer case
This section is only valid for vehicles with 4-wheel drive (4MATIC). Power is always transmitted to both axles.
Performance tests may only be
carried
out on a 2-axle dynamometer. The brake
system or transfer case could otherwise be
damaged. Contact a qualified specialist
workshop for a performance test.
Mercedes-Benz recommends that you use
an authorized Mercedes-Benz Center for
this purpose.
If the parking brake is being
tested on a
brake dynamometer, the ignition must be
switched off (SmartKey or Start/Stop
button in position 0 or 1), as ESP® will
otherwise automatically intervene. The
brake system could otherwise be damaged.
See also:
Downloading destinations in COMAND
Information on the components and
operating principles of COMAND can be
found in the separate COMAND operating
instructions.
You can only use the Destination
Download function if the vehicle ...
Selecting a film/title
This function is only available if the DVD is
divided into several films/tracks. If the DVD
contains several films, these can be selected
directly. A film can be selected either when
the DVD i ...
Checking the oil level using the oildipstick
When checking the oil level:
• park the vehicle on a level surface.
• the engine should be switched off for
approximately five minutes if the engine is
at normal operating temperature.
Example: ...