Hill start assist

Hill start assist helps you when pulling away forwards or in reverse on an uphill gradient.

It holds the vehicle for a short time after you have removed your foot from the brake pedal.

This gives you enough time to move your foot from the brake pedal to the accelerator pedal and depress it before the vehicle begins to roll.

WARNING
Never leave the vehicle when it is held by hill start assist. After approximately one second, hill start assist will no longer brake your vehicle and it could roll away.

pedal. Take your foot off the brake pedal.

off the Once you have taken your foot off the brake pedal, the vehicle is held for around one second.

Hill start assist will not function if: Pull away.

Hill start assist will not function if:
• you are pulling away on a level road or a downhill gradient.
• the transmission is in position N.
• the parking brake is applied.
• ESP® is malfunctioning.

    See also:

    Mounting a new wheel
    WARNING Always replace wheel bolts that are damaged or rusted. Never apply oil or grease to wheel bolts. Damaged wheel hub threads should be repaired immediately. Do not continue to drive un ...

    Tire characteristics
    Tire data is vehicle-specific and may deviate from the data in the example. This information describes the tire cord and the number of layers in sidewall 1 and under the tread 2. ...

    Safety systems
    WARNING Driving with the brake warning lamp illuminated can result in an accident. Have your brake system checked immediately if the brake warning lamp stays on. Do not add brake fluid before che ...