Activating/deactivating the residual heat function
The residual heat function is only available in vehicles for Canada with automatic climate control.
It is possible to make use of the residual heat of the engine to continue heating the stationary vehicle for up to 30 minutes after the engine has been switched off. The heating time depends on the temperature that has been set.
The blower will run at a low speed regardless of the airflow setting.
If you activate the residual heat function at high temperatures, only the ventilation will be activated. The blower runs at medium speed.
Turn the SmartKey to position
0 in the ignition lock or remove it.
To activate: press the
button.
The indicator lamp in the button
lights up.
To switch off: press the
button.
The indicator lamp in the button
goes out.
Residual heat is deactivated
automatically:
• after about 30 minutes
• when the ignition is switched on
• if the battery voltage drops
• if the coolant temperature is too low
See also:
Activating/deactivating
- To activate: press the
button.
The indicator lamp in the
button lights up.
- To deactivate: press the
button.
The indicator lamp in the
button goes out. The cooling with air
dehumid ...
Applying automatically
Your vehicle's electric parking brake is
automatically applied if DISTRONIC PLUS or
the HOLD function bring the vehicle to a
standstill, or are engaged to keep the vehicle
stationary. In addit ...
Override feature for the rear side windows
WARNING
When children ride on the vehicle's rear seats,
activate the override switch. Otherwise, the
children could be injured, e.g. by trapping
themselves in the rear side window.
For the r ...