Defrosting the windshield
You can use this function to defrost the windshield or to defrost the inside of the windshield and the side windows.
You should only select the defrosting function until the windshield is clear again.
Turn the SmartKey to position
2 in the ignition lock.
To activate: press the
button.
The indicator lamp in the button
lights up.
The climate control system switches to the following functions:
• cooling with air dehumidification on
• high airflow
• high temperature
• air distribution to the windshield and front side windows
• air-recirculation mode off
To switch off: press the
button.
The indicator lamp in the button
goes
out. The previously selected settings come
into effect again. The cooling with air
dehumidification function remains on. Airrecirculation
mode remains deactivated.
or
Press the
button.
The indicator lamp in the button
goes
out. Airflow and air distribution are set to
automatic mode.
or
Turn temperature control 1 or 6
clockwise or counter-clockwise.
or
Press the
or
button.
See also:
Important safety notes
WARNING
Inhalation of exhaust gas is hazardous to your
health. All exhaust gas contains carbon
monoxide (CO), and inhaling it can cause
unconsciousness and possible death.
Do not run the eng ...
Brake fluid level
If you notice that the brake fluid level in
the brake fluid reservoir has fallen to the
MIN mark or less, check the brake system
immediately for leaks. Also check the
thickness of the brake lini ...
SmartKey
Display messages
Key Does Not
Belong to Vehicle
Possible causes/consequences and ►
Solutions
You have put the wrong SmartKey in the ignition lock.
► Use the correct SmartKey.
Disp ...