Tail lamp
Switch off the lights.
Open the trunk.
Open the side trim panel.
Remove the tail lamp connector
Simultaneously press retaining lugs
1 in the direction of the arrow and slightly pull out the bulb holder with the
bulbs.
Remove the connector for LED light
functions from the top of the bulb holder.
Pull the bulb holder out with the
bulbs.
1 Backup lamp
2 Brake lamp
3 Parking lamp/brake lamp
Press the respective bulb 1, 2
or 3 back and turn it counter-clockwise to remove it from the bulb holder.
Insert the new bulb into the bulb
holder and turn it clockwise.
Reinsert the connector for LED
light functions in the bulb holder.
Insert the bulb holder again and
lock it in place.
Insert the tail lamp connector.
Close the side trim panel
See also:
Model range: High level of standard appointments and individual variants
Individuality and variety have always been two of the outstanding attributes
of the Mercedes-Benz E-Class. The new saloon not only provides Mercedes
customers with a choice of ten engines and thre ...
Vehicle identification plate
Even if you have calculated the total load
carefully, you should still make sure that the
gross vehicle weight rating and the gross axle
weight rating are not exceeded. Details can
be found on ...
Traction
WARNING
The traction grade assigned to this tire is
based on straight-ahead braking traction
tests, and does not include acceleration,
cornering, hydroplaning, or peak traction
characterist ...