High-beam headlamps

headlamps: turn the SmartKey in the ignition lock to position 2 or start To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine.
or Turn the light switch to or or . or Press the combination switch beyond.
the pressure point in the direction of arrow 1. Press the combination switch beyond the pressure point in the direction of arrow 1.
In the position, the highbeam headlamps or are only switched on when it is dark and the engine is running. position, the highbeam headlamps are only switched on when it is dark and the engine is running.
The instrument cluster lights up when the high-beam headlamps are switched on. indicator lamp in the instrument cluster lights up when the high-beam headlamps are switched on.
headlamps: move the combination switch back to its normal position. To switch off the high-beam headlamps: move the combination switch back to its normal position.
The instrument cluster goes out. indicator lamp in the instrument cluster goes out.

    See also:

    Socket in the front-compartment centerconsole
    If accessories are connected, make sure that a maximum current draw of 15 A is not exceeded. Otherwise, you will overload the fuse. The socket is not suitable for operating the tire inflati ...

    Switching COMAND on/off
    Press the function button on the center console. If you switch off COMAND, playback of the current audio or video source will also be switched off. You cannot switch off COMAND while mak ...

    ESP® trailer stabilization
    If your vehicle with trailer (vehicle/trailer combination) begins to lurch, you can only stabilize the vehicle/trailer combination by depressing the brake firmly. In this situation, ESP® assists yo ...