Storing settings
With the memory function, you can store up to three different settings, e.g. for three different people.
The following settings are stored as a single memory preset:
• position of the seat, backrest and head restraint
• driver's side: steering wheel position
• driver's side: position of the exterior mirrors on the driver's and
front-passenger sides
WARNING
Do not activate the memory function while
driving. Activating the memory function while
driving could cause the driver to lose control
of the vehicle.
Adjust the seat.
On the driver's side, adjust the
steering wheel and the exterior mirrors.
Press memory button M and
one of the storage position buttons 1, 2 or 3 within three
seconds.
The settings are stored in the selected preset position. A tone sounds when the
settings have been completed.
See also:
LATCH-type (ISOFIX) child seat anchorsin the rear
WARNING
Children that are too large for a child restraint
must travel in seats using normal seat belts.
Position shoulder belt across the chest and
shoulder, not face or neck.
In orde ...
Kickdown
Kickdown is not possible in manual drive
program M. ...
Instruction labels for tires and loads
WARNING
Do not overload the tires by exceeding the
specified load limit as indicated on the Tire
and Loading Information placard on the
driver's door B-pillar. Overloading the tires
can ove ...