Calling up a stored parking position setting
Turn the SmartKey to position
2 in the
ignition lock.
Adjust the exterior mirror on the
frontpassenger
side with the corresponding
button.
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger side moves back to its original
position:
• as soon as you exceed a speed of 6 mph
• about ten seconds after you have disengaged reverse gear
• if you press button 1 for the exterior mirror on the driver's side
See also:
Restoring the factory settings
► Press the
buttons
simultaneously for approximately six
seconds until the battery check lamp
flashes twice. ...
Removing the skis and folding up the
skibag
•► Loosen the two straps.
•► Remove hook 1 from securing ring 2.
•► Take the skis out of the skibag.
•► Close the flap in the trunk.
•► Smooth out the skibag and fold ...
Limited braking performance on salttreated
roads
WARNING
The layer of salt on the brake discs and the
brake pads/linings may cause a delay in the
braking effect, resulting in a significantly
longer braking distance, which could lead to
an ...