Switching on/off

The three blue indicator lamps in the buttons indicate the ventilation level you have selected.

low, the seat If the battery voltage is too low, the seat ventilation may switch off.

Make sure that the SmartKey is

in position 2 in the ignition lock. Make sure that the SmartKey is in position 2 in the ignition lock.
repeatedly until the desired ventilation level is set. To switch on: press button 1 repeatedly until the desired ventilation level is set.

and the You can open the side windows and the sliding sunroof using the "Convenience opening" feature. The seat ventilation of the driver's seat automatically switches to the highest level.

button 1 repeatedly To switch off: press button 1 repeatedly until all the indicator lamps go out.

    See also:

    Starting procedure with the SmartKey
    To start the engine using the SmartKey instead of KEYLESS-GO, pull the Start/ Stop button out of the ignition lock. •►  To start a gasoline engine: turn the SmartKey to position 3 in ...

    Maximum load rating
    WARNING Do not overload the tires by exceeding the specified load limit as indicated on the Tire and Loading Information placard on the driver's door B-pillar. Overloading the tires can o ...

    Side impact air bags
    WARNING The pressure sensors for side impact air bag control are located in the doors. Do not modify any components of the doors or door trim panels including, for example, the addition o ...