Switching on/off
WARNING
Repeatedly setting the seat heating to level
3 may result in excessive seat temperatures.
The health of passengers that have limited
temperature sensitivity or a limited ability to
react to excessively high temperatures may
be affected or they may even suffer burn-like
injuries. Therefore, do not use seat heating
level 3 repeatedly.
The three red indicator lamps in the button indicate the heating level you have selected.
If the battery voltage is too low, the seat heating may switch off.
Driver's and front-passenger seat
The system automatically switches down from level 3 to level 2 after approximately eight minutes.
The system automatically switches down from level 2 to level 1 after approximately ten minutes.
The system automatically switches off approximately 20 minutes after it is set to level 1.
Make sure that the SmartKey is
in position 1 or 2 in the ignition lock.
To switch on: press button 1
repeatedly until the desired heating level is set.
To switch off: press button
1 repeatedly until all the indicator lamps go out.
See also:
Problems with Night View Assist Plus
Problem
Possible causes/consequences and
Solutions
The picture quality of Night View Assist Plus has
deteriorated.
The windshield wipers are smearing the windshield.
– ...
Problems with the occupant classification system
WARNING
If the indicator lamp
illuminates and remains illuminated when the weight of a
typical adult or someone larger than a small individual has been detected on the
passenger s ...
Lowering the vehicle
– Place the ratchet wrench onto the hexagon
nut of the jack so that the letters AB are
visible.
– Turn the ratchet wrench until the vehicle is
once again standing firmly on the ground.
– Place ...