Operating the panorama roof with power tilt/sliding panel
Opening and closing
Overhead control panel
1 To raise
2 To open
3 To close/lower
The panorama roof with power tilt/sliding panel can only be operated when the roller sunblind is open.
Turn the SmartKey to position 1
or 2 in the ignition lock.
Push or pull the
switch in the corresponding
direction.
If you press the
switch beyond the
point of resistance, an automatic opening/closing process is started in the
corresponding direction. You can stop
automatic operation by operating the
switch again.
When raising the roof, automatic operation
is only available if the panorama roof with
power tilt/sliding panel is in the closed
position.
See also:
Adjusting the steering wheel manually
elease lever
To adjust the steering wheel height
To adjust the steering wheel position (fore-and-aft adjustment)
Push release lever 1 down completely. The steering column is unlocked.
...
Important notes
This section provides detailed information on the following topics:
• selecting a channel and program category
• memory functions
• sound settings
The satellite radio mode described below
...
Rear fog lamp
- To switch on the rear fog lamp: turn the
SmartKey in the ignition lock to position 2
or start the engine.
- Turn the light switch to or
or
.
If the light switch is set to or
,
the rear ...