Resetting the side windows

You must reset each side window if a side window can no longer be closed fully.

Turn the SmartKey to position 1 Close all the doors.
or 2 in the ignition lock. Turn the SmartKey to position 1 or 2 in the ignition lock.
the door control panel until the side window is completely closed. Pull the corresponding switch on the door control panel until the side window is completely closed.
second. Hold the switch for an additional second.

If the side window opens again slightly:
switch on the door control panel until the side window is completely closed. Immediately pull the corresponding switch on the door control panel until the side window is completely closed.
second. Hold the switch for an additional second.
remains closed after the button has been released, the side window has been If the corresponding side window remains closed after the button has been released, the side window has been reset correctly. If this is not the case, repeat the steps above again.

    See also:

    Important safety notes
    Service products include the following: • fuels (e.g. gasoline, diesel) • lubricants (e.g. engine oil, transmission oil) • coolant • brake fluid • windshield washer fluid Vehicle components and ...

    Initiating point of interest entry
    To activate navigation mode: press the function button once or twice. To show the menu: press the COMAND controller. Select Destination in the navigation system menu bar by turning ...

    Active Lane Keeping Assist
    Important safety notes Active Lane Keeping Assist monitors the area in front of your vehicle by means of a camera at the top of the windshield. Active Lane Keeping Assist detects lane markings ...