Checking tire pressure electronically
– Make sure that the SmartKey is in position
2 in the ignition lock.
– Press the or
button on the
steering wheel to select the Serv. menu.
– Press the or
button to select
Tire Pressure.
– Press the
button.
The current tire pressure for each wheel will
be displayed in the multifunction display.
If the vehicle has been parked for longer than 20 minutes, the Tire pressure will be displayed after driving a few minutes message appears in the display.
After a teach-in period, the tire pressure monitor automatically recognizes new wheels or new sensors. If a clear allocation of the tire pressure values to the individual wheels is not possible, the Tire Pressure Monitor Active message is shown instead of the tire pressure display. The tire pressures are already being monitored.
If a spare wheel/emergency spare wheel is mounted, the system may continue to show the tire pressure of the wheel that has been removed for a few minutes. If this occurs, note that the value displayed for the position where the spare tire is mounted is not the same as the spare wheel/emergency spare wheel's current tire pressure.
See also:
Tail lamps with LEDs
1 Rear fog lamp
2 Backup lamp
► Switch off the lights.
► Open the cargo compartment.
► Open the side trim panel.
► Turn the corresponding bulb holder
counter-clockwise ...
Tire size designation, load-bearing capacity and speed rating
Tire width
Nominal aspect ratio in %
Tire code
im diameter
Load bearing index
Speed rating
Tire data is vehicle-specific and may deviate from the data in the example.
General: de ...
Important safety notes
The HomeLink® garage door opener
integrated in the rear-view mirror allows you
to operate up to three different door and gate
systems.
Certain garage door drives are
incompatible with the in ...