Towing a vehicle with both axles on the ground
When having your vehicle towed, observe the important safety notes.
WARNING
The power assistance for the steering and the
brake force booster do not work when the
engine is not running. You will then need
much more effort to brake and steer the
vehicle. Adapt your style of driving
accordingly.
The automatic transmission automatically
shifts to position P when you open the driver's
or front-passenger door or when you remove
the SmartKey from the ignition lock. In order
to ensure that the automatic transmission
stays in position N when towing the vehicle,
you must observe the following points:
– Make sure that the vehicle is stationary and
the SmartKey in the ignition lock is in
position 0.
– Turn the SmartKey to position 2 in the
ignition lock.
On vehicles with KEYLESS-GO, use the key
instead of the Start/Stop button.
– Depress and hold the brake pedal.
– Shift the automatic transmission to
position N.
– Release the brake pedal.
– Release the electric parking brake.
– Switch on the hazard warning lamps.
– Leave the SmartKey in position 2 in the
ignition lock.
When towing with the hazard warning
lamps switched on, use the combination
switch as usual to signal a change of
direction. In this case, only the turn signals
for the desired direction flash. When the
combination switch is reset, the hazard
warning lamps start flashing again.
See also:
Vehicles without extended Off-Road Proengineering package
Basic setting
The extent to which the vehicle is raised or
lowered depends on the basic setting
selected.
Select:
• Raised level, for driving on normal
off-road
terrain
• Highway/high-speed ...
Folding the exterior mirrors in or outautomatically
If the "Fold in mirrors when locking" function
is activated in the on-board computer:
• the exterior mirrors fold in automatically
as
soon as you lock the vehicle from the
outside.
...
Hood
Opening the hood
WARNING
Do not pull the release lever while the vehicle
is in motion. Otherwise, the hood could be
forced open by passing air flow.
This could cause the hood to come loose ...