Installing the towing eye
Vehicles with a trailer tow hitch: if possible, secure the towing device on the trailer tow hitch.
– Remove the towing eye required for frontal or rear coupling from the vehicle tool kit.
The mountings for the removable towing eyes are located in the bumpers. They are at the front and at the rear, under the covers.
Observe the identification labels on the towing eyes and the information panels on using the towing eyes with the vehicle. The towing eyes must be installed in the correct positions. Install the longer towing eye at the front of the vehicle and the shorter towing eye at the back.
– To open the cover at the front: press
cover 1 inwards in the direction of the
arrow at the marking.
– To open the cover at the rear: insert a
flat, blunt object into the cutout and lever
off cover 2 from the bumper.
– Take cover 1 or 2 off the opening.
– Screw the towing eye in clockwise to the
stop and tighten it.
See also:
Making adjustments in 5 mph (Canada:
10 km/h) increments
Briefly press the cruise control lever
beyond the pressure point, up 1 for a
higher speed or down 2 for a lower speed.
The last speed stored is increased or
reduced. ...
Folding the rear bench seat back
► Pull release catch 3 upwards.
► Fold backrest 2 backwards until it
engages, making sure not to trap the seat
belts while doing so.
► Fold seat cushion 1 backwards and push
u ...
Important safety notes
WARNING
Inhalation of exhaust gas is hazardous to your
health. All exhaust gas contains carbon
monoxide (CO), and inhaling it can cause
unconsciousness and possible death.
Do not run the e ...