Securing the vehicle to prevent it from rolling away
WARNING
Only jack up the vehicle on level ground or on
slight inclines/declines. The vehicle could
otherwise fall off the jack and injure you or
others.
If your vehicle is equipped with a wheel chock, it can be found in the vehicle tool kit (Y page 328).
The folding wheel chock is an additional securing measure to prevent the vehicle from rolling away, for example when changing a wheel.
– Fold both plates upwards 1.
– Fold out lower plate 2.
– Guide the lugs on the lower plate fully into
the openings in base plate 3.
Securing the vehicle on level ground
– On level ground: place chocks or other suitable items under the front and rear of the wheel that is diagonally opposite the wheel you wish to change.
Securing the vehicle on slight downhill gradients
– On downhill gradients: place chocks or other suitable items in front of the wheels of the front and rear axle.
See also:
Cleaning genuine wood and trim elements
Wipe the wooden trim and trim pieces with a damp, lint-free cloth, e.g.
a microfiber cloth.
Heavy soiling: use car care and cleaning products recommended and approved
by Mercedes-Benz.
...
Switching the windshield wipers on/
off
WARNING
Wiper blades are components that are subject
to wear and tear. Replace the wiper blades
twice a year, preferably in the spring and fall.
Otherwise the windshield will not be wiped
...
Cornering light function
The cornering light function improves the
illumination of the road over a wide angle in
the direction you are turning, enabling better
visibility in tight bends, for example. It can
only be ...