Cleaning the trailer tow hitch
The ball coupling must be cleaned if it becomes dirty or corroded.
– Remove rust on the ball of the ball coupling,
e.g. with a wire brush.
– Remove dirt with a clean, lint-free cloth or
a brush.
– After cleaning, lightly grease the ball of the
ball coupling again.
– Check that the vehicle's trailer tow hitch is
working properly.
Observe the note on care provided by the trailer manufacturer.
You can also have the maintenance work on the ball coupling and the trailer tow hitch carried out by a qualified specialist workshop.
Environmental note
Dispose of rags soaked in oil and grease in an
environmentally responsible manner.
See also:
General information about Bluetooth®
Bluetooth® technology is the standard for
short-range wireless data transmission of up
to approximately 10 meters. Bluetooth®
allows, for example, the exchange of vCards.
Bluetooth® is a regist ...
Position of the steering wheel and the driver's seat for driving
If you insert the SmartKey into the ignition
lock with the driver's door closed, depending
on the setting, the position of the steering
wheel and the driver's seat will be changed to
the previ ...
Data stored in the vehicle
Information about electronic data
acquisition in the vehicle
(Including notice pursuant to California Code
§ 9951)
Your vehicle records electronic data. If your
vehicle is equipped with mbrace3, ...