Brake fluid level

If you notice that the brake fluid level in If you notice that the brake fluid level in the brake fluid reservoir has fallen to the MIN mark or less, check the brake system immediately for leaks. Also check the thickness of the brake linings. Contact a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center immediately.
Do not add brake fluid. This does not correct the error.

Only check the brake fluid level when the vehicle is stationary and on a level surface.

In order to check the brake fluid level, the cover above the brake fluid reservoir must be removed.

– Remove seal 2 in the area around

– Remove seal 2 in the area around cover 1 in the direction of the arrow.

– Raise cover 1 at the front.

– Raise cover 1 at the front.
– Pull out cover 1 in the direction of the arrow.

The brake fluid level is correct if it is between

The brake fluid level is correct if it is between MIN marking 4 and MAX marking 3 on the brake fluid reservoir.

Cover 1 is installed in the reverse order.

When doing so, make sure that the guides of cover 1 engage in the slots in the bulkhead.

    See also:

    Using the phone book and address book
    The COMAND phone book is an extract of those entries from the address book which contain at least one telephone number. The address book organizes and stores entries that are entered from diffe ...

    Driving with summer tires
    At temperatures below 45 °F (+7 °C), the elasticity of summer tires and therefore also traction and braking capability are reduced considerably — equip your vehicle with M+S tires. Using summe ...

    Problems with the windshield wipers
    The windshield wipers are obstructed Leaves or snow, for example, may be obstructing the windshield wiper movement. The wiper motor has been deactivated. ► For safety reasons, you should ...