Removing/installing the cargo compartment cover with integrated cargo net
You can install and remove the combined cargo cover and net from the cargo compartment.
– Make sure that the cargo net and the cargo compartment cover are rolled up.
– To remove: press button 2.
– Swing the combined cargo cover and net in
the direction of the arrow.
– First, detach the combined cargo cover and
net from left-hand catch 1 and then
remove it from right-hand fixture 3.
– To install: push the combined cargo cover
and net up to the stop into right-hand
fixture 3.
– Place the combined cargo cover and net
into the left-hand fixture and push it into
catch 1 until the combined cargo cover
and net engages audibly.
– Make sure that red lock status indicator 4 is no longer visible. The combined cargo cover and net will otherwise not be locked in place.
See also:
Traction
WARNING
The traction grade assigned to this tire is based on straight-ahead braking traction
tests, and does not include acceleration, cornering, hydroplaning, or peak traction
characteristi ...
Storing settings
With the memory function, you can store up
to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:
- position of the se ...
Position of the steering wheel when theEASY-ENTRY/EXIT feature is active
The steering wheel swings upwards when
you:
• remove the SmartKey from the ignition
lock
• open the driver's door and KEYLESS-GO is
in position 1
• open the driver's door and the SmartKey is
...