Changing the battery
You require a CR 2025 3 V cell battery.
Take the mechanical key out of the SmartKey.
Press mechanical key 2 into the opening in the SmartKey in the direction of the arrow until battery tray cover 1 opens. When doing so, do not hold cover 1 shut.
Remove battery tray cover 1.
Repeatedly tap the SmartKey
against your palm until battery 3 falls out.
Insert the new battery with the
positive terminal facing upwards. Use a lint-free cloth to do so.
Make sure that the surface of the
battery is free from lint, grease and all other forms of contamination.
Insert the front tabs of battery
tray cover 1 and then press to close it.
Insert the mechanical key into the
SmartKey.
Check the function of all SmartKey
buttons on the vehicle.
See also:
Route overview
You can use the overview of the route to move
along the route section by section and to see
details of the route sections.
You have entered a destination
or a point of interest
and possibly a ...
Cargo tie-down rings
Observe the following notes on securing loads:
secure the load using the cargo tie down rings.
do not use elastic straps or nets to secure a load, as these are only intended
as an anti-slip p ...
Switching the screen on/off (Rear Seat
Entertainment System only)
If the SmartKey is in the ignition lock in
position 0 or 1 or if the SmartKey is not in the
ignition lock, the rear screens will switch off
after 30 minutes. Before the screens switch
off, the ...