SmartKey

Display messages Possible causes/consequences and Solutions
You have put the wrong SmartKey in the ignition lock. You have put the wrong SmartKey in the ignition lock.
– Use the correct SmartKey.
The SmartKey is in the ignition lock. The SmartKey is in the ignition lock.
– Remove the SmartKey.
The SmartKey needs to be replaced. The SmartKey needs to be replaced.
– Visit a qualified specialist workshop.
The batteries of the KEYLESS-GO key are discharged. The batteries of the KEYLESS-GO key are discharged.
– Change the batteries.
The display message is shown for a maximum of 60 seconds and is only The display message is shown for a maximum of 60 seconds and is only a reminder.
You have opened the driver's door with the engine switched off.
The KEYLESS-GO key is not in the ignition lock.
– Remember to take the KEYLESS-GO key with you when you leave the vehicle.
The KEYLESS-GO key is not in the vehicle. The KEYLESS-GO key is not in the vehicle.
A warning tone also sounds.
If the engine is switched off, you can no longer lock the vehicle centrally or start the engine.
– Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions.
– Apply the electric parking brake.
– Locate the KEYLESS-GO key.
The KEYLESS-GO key is not detected while the engine is running because there is interference from a strong source of radio waves.
A warning tone also sounds.
– Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions.
– Engage the electric parking brake.
– Operate the vehicle with the SmartKey in the ignition lock.
The KEYLESS-GO key cannot be detected at present. The KEYLESS-GO key cannot be detected at present.
– Change the location of the key with the KEYLESS-GO functions in the vehicle.
If the KEYLESS-GO key is still not detected:
– Operate the vehicle with the SmartKey in the ignition lock.
The KEYLESS-GO key has been detected inside the vehicle during The KEYLESS-GO key has been detected inside the vehicle during locking.
– Remove the KEYLESS-GO key from the vehicle.
KEYLESS-GO is temporarily malfunctioning or is defective. A warning KEYLESS-GO is temporarily malfunctioning or is defective. A warning tone also sounds.
– Insert the SmartKey into the ignition lock and turn it to the desired position.
– Visit a qualified specialist workshop.
At least one door is open. A warning tone also sounds. At least one door is open. A warning tone also sounds.
– Close all doors and lock the vehicle again.
    See also:

    Detecting a parking space
    1 Detected parking space on the left 2 Parking symbol 3 Detected parking space on the right Parking Guidance is automatically activated when you drive forwards. The system is operational at s ...

    Coolant temperature display
    WARNING Driving when your engine is overheated can cause some fluids which may have leaked into the engine compartment to catch fire. You could be seriously burned. Steam from an overheated ...

    Vehicle identification plate with vehicle identification number (VIN) and paint code number
      Open the driver's door. You will see vehicle identification plate 1. Example: vehicle identification plate (USA only) 2 VIN 3 Paint code Example: vehicle identification plate (Canada ...