Vehicle
Activating/deactivating the automatic door locking feature
If you select the Automatic Door Lock:
function, the vehicle is centrally locked above a speed of around 9 mph (15 km/h).
For further information on the automatic locking feature.
– Press the or button on the steering wheel to select the Settings menu.
– Press the or button to select the Vehicle submenu.
– Press the button to confirm.
– Press the or button to select the Automatic Door Lock function.
You will see the selected setting: Enabled or Disabled.
– Press the button to save the setting.
Activating/deactivating the acoustic locking verification signal
If you switch on the Acoustic Lock feedback function, an acoustic signal sounds when you lock the vehicle.
– Press the or button on the steering wheel to select the Settings menu.
– Press the or button to select the Vehicle submenu.
– Press the button to confirm.
– Press the or button to select the Acoustic Lock feedback: function.
You will see the selected setting: On or Off.
– Press the button to save the setting.
Activating/deactivating the radar sensor system
The following systems are switched off when
the radar sensor system is deactivated:
- DISTRONIC PLUS
- BAS PLUS
- PRE-SAFE® Brake
- Blind Spot Assist
- Active Blind Spot Assist
USA only: This device has been approved
by the FCC as a "Vehicular Radar System".
The radar sensor is intended for use in an
automotive radar system only. Removal,
tampering, or altering of the device will void
any warranties, and is not permitted by the
FCC. Do not tamper with, alter, or use in
any non-approved way.
Any unauthorized modification to this
device could void the user's authority to
operate the equipment.
Canada only:
This device complies with RSS-210 of
Industry Canada. Operation is subject to
the following two conditions:
1. This device may not cause harmful
interference, and
2. this device must accept any interference
received, including interference that may
cause undesired operation.
Any unauthorized modification to this
device could void the user's authority to
operate the equipment.
– Press the or
button on the
steering wheel to select the Settings
menu.
– Press the or
button to select the
Vehicle submenu.
– Press the button to confirm.
– Press the or
button to select
Radar Sensor (See Oper. Manual):.
You will see the selected setting: Enabled
or Disabled.
– Press the button to save the
setting.
See also:
Tire pressure monitor warning messages
If the tire pressure monitor detects a significant pressure loss on one or more
tires, a warning message is shown in the multifunction display. A warning tone also
sounds and the tire pressure war ...
Assistants to see and be seen better
The Adaptive High Beam Assist system is now offered as standard equipment on
the Mercedes-Benz CL-Class. This camera-based system can recognize oncoming
vehicles or vehicles ahead with their light ...
Selecting a radio station
SIRIUS XM satellite radio acts like a normal radio.
For more information on satellite radio operation, see the separate operating
instructions.
You can only change the waveband and store new st ...