Switching the daytime running lamps on/off

This function is not available in Canada.

If you have activated the Daytime Running Lights: function and the light switch is in the or position, the daytime running lamps are switched on automatically during the day when the engine is running.

In the dark, the following also light up:
- the low-beam headlamps
- the parking lamps
- the tail lamps
- the license plate lamp
- the side marker lamps

– Press the or button on the steering wheel to select the Sett. menu.
– Press the or button to select the Lights submenu.
– Press the button to confirm.
– Press the or button to select the Daytime Running Lights: function.
You will see the selected setting: Enabled or Disabled.
– Press the button to save the setting.

Switching Adaptive Highbeam Assist on/off

– Press the or button on the steering wheel to select the Sett. menu.
– Press the or button to select the Lights submenu.
– Press the button to confirm.
– Press or to select the Adaptive Highbeam Assist: function.
You will see the selected setting: Enabled or Disabled.
– Press the button to save the setting.

Setting the brightness of the ambient lighting

– Press the or button on the steering wheel to select the Settings menu.

– Press the or button to select the Lights submenu.

– Press the or button to select Ambient light.

You will see the selected setting.

– Press the button to confirm.

– Press the or button to adjust the brightness to any level from Off to Level 5 (bright).

– Press the or button to save the setting.

Setting the ambient lighting color

– Press the or button on the steering wheel to select the Settings menu.

– Press the or button to select the Light submenu.

– Press the button to confirm.

– Press the or button to select the Ambient light color function.

– Press the button to confirm.

– Press the or button to set the color to SOLAR, NEUTRAL or POLAR.

– Press the or button to save the setting.

Activating/deactivating surround lighting and exterior lighting delayed switch-off

If you have activated the Lighting: function and the light switch is in the or position, the following functions are active when it is dark:
RSurround lighting: the exterior lighting remains lit for 40 seconds after unlocking with the key. If you start the engine, the surround lighting is switched off and the automatic headlamp mode is activated.
RExterior lighting delayed switch-off: the exterior lighting remains lit for 60 seconds after the engine has been switched off. If you close all the doors, the exterior lighting goes off after 15 seconds.

If you activate the Lighting: function, the following light up depending on the vehicle's equipment:
- the parking lamps
- the daytime running lamps
- the side marker lamps
- the surround lighting in the exterior mirrors

– Press the or button on the steering wheel to select the Sett. menu.
– Press the or button to select the Lights submenu.
– Press the button to confirm.
– Press the or button to select the Locator Lighting: function.
You will see the selected setting: Enabled or Disabled.
– Press the button to save the setting.
Deactivating delayed switch-off of the exterior lighting temporarily:
– Before leaving the vehicle, turn the SmartKey to position 0 in the ignition lock.
– Turn the SmartKey to position 2 in the ignition lock and back to position 0.
The exterior lighting delayed switch-off is deactivated.

Delayed switch-off of the exterior lighting is reactivated the next time you start the engine.

Activating/deactivating the interior lighting delayed switch-off

If you activate the Interior Lighting Delay function, the interior lighting remains on for 20 seconds after you remove the SmartKey from the ignition lock.

– Press the or button on the steering wheel to select the Settings menu.

– Press the or button to select the Lights submenu.

– Press the button to confirm.

– Press the or button to select the Interior Lighting Delay: function.

You will see the selected setting: Enabled or Disabled.

– Press the button to save the setting.