Warning and display messages in the multifunction display

Mercedes-Benz M-Class / Mercedes-Benz M-Class Owners Manual / Driving and parking / Driving systems / ATTENTION ASSIST / Warning and display messages in the multifunction display

– Activate ATTENTION ASSIST using the onboard

– Activate ATTENTION ASSIST using the onboard computer (Y page 232).
Symbol 1 appears in the multifunction display.

– If necessary, take a break.
– Press to confirm the or message. to confirm the message.

On long journeys, take regular breaks in good time to allow yourself to rest properly. If you do not take a break and ATTENTION ASSIST still detects typical indicators of fatigue or increasing lapses in concentration, you will be warned again after 15 minutes at the earliest.

ATTENTION ASSIST is reset when you continue your journey and starts assessing your tiredness again if:
- you switch off the engine.
- you take off your seat belt and open the driver's door, e.g. for a change of drivers or to take a break.

    See also:

    Adjusting the lumbar support
    Vehicles without the memory function: You can adjust the contour of the front seats so as to provide optimum support for your back. Move adjustment lever 1 in the direction of the arrow until the ...

    Overall evaluation
    This function is shown if you have stored at least one lap and stopped the RACETIMER. Press or on the steering wheel to select the AMG menu. Press the button repeatedly until the overa ...

    Notes on the oil level
    Depending on the driving style, the vehicle consumes up to 0.9 US qts. (0.8 l) of oil over a distance of 600 miles (1000 km). The oil consumption may be higher than this when the vehicle is new or ...