Important safety notes

Gasoline and diesel fuels are highly flammable WARNING
Gasoline and diesel fuels are highly flammable and poisonous. They burn violently and can cause serious injury.
Never allow sparks, flames or smoking materials near gasoline or diesel fuel!
Turn off the engine before refueling.
Whenever you are around gasoline or diesel fuel, avoid inhaling fumes and any skin or clothing contact. Extinguish all smoking materials.
Direct skin contact with fuels and the inhalation of fuel vapors are damaging your health.

Overfilling of the fuel tank may create WARNING
Overfilling of the fuel tank may create pressure in the system which could cause a gas discharge. This could cause the gasoline to spray back out when removing the fuel pump nozzle, which could cause personal injury.

Do not fill diesel tanks with gasoline. Do not WARNING
Do not fill diesel tanks with gasoline. Do not mix diesel fuel with gasoline. Otherwise the fuel system and engine could be damaged. In addition, the vehicle could catch fire.

Do not use gasoline to refuel vehicles with Do not use gasoline to refuel vehicles with a diesel engine. Do not use diesel to refuel vehicles with a gasoline engine. Even a small quantity of the wrong fuel will damage the fuel system and engine.

Do not switch on the ignition if you Do not switch on the ignition if you accidentally refuel with the wrong fuel.
Otherwise, the fuel will enter the fuel lines.
Notify a qualified specialist workshop and have the fuel tank and fuel lines drained completely.

    See also:

    PRE-SAFE® (preventative occupant protection)
    WARNING The PRE-SAFE® system reduces the impact of an accident on vehicle occupants, as long as their seat belts have been fastened correctly. Although your vehicle is equipped with a PRESAF ...

    Service menu
    In the Service menu you can: call up display messages () restart the tire pressure loss warning system (Canada only) () check the tire pressure electronically (USA only) () call up the ser ...

    Fast forward/rewind
    While the display/selection window is active, slide and hold the COMAND controller until the desired position has been reached. ...