Engaging park position P automatically
Park position P is automatically engaged if:
- you switch off the engine using the
SmartKey and remove the SmartKey, or if
you switch off the engine using the Start/Stop button and open one of the front
doors.
- the HOLD function (Y page 179) or
DISTRONIC PLUS (Y page 169) brakes
your vehicle until it is stationary and at least
one of the following conditions is fulfilled:
- there is a system malfunction.
- there is a severe uphill or downhill slope.
The electric parking brake is then also
applied.
See also:
Problems with the occupant classification system
Problem
Possible causes/consequences and
Solutions
The indicator lamp
illuminates and remains illuminated.
The person on the front-passenger seat:
- has the weight of ...
Removing the ball coupling
Observe the manufacturer's installation instructions.
Press the protective cap into the ball coupling recess.
Make sure that the protective cap is firmly in place.
...
Exterior
A strictly utilitarian appearance is softened somewhat by body-colored
bumpers, rub strips and rocker panels, as well as alloy wheels and a
stainless-steel spare-tire cover. At 183.5 inches long o ...