Activating/deactivating the residual heat function
The residual heat function is only available in Canada It is possible to make use of the residual heat of the engine to continue heating the stationary vehicle for up to 30 minutes after the engine has been switched off. The heating time depends on the temperature that has been set.
The blower will run at a low speed regardless of the airflow setting.
If you activate the residual heat function at high temperatures, only the ventilation will be activated. The blower runs at medium speed.
- Turn the SmartKey to position 0 in the
ignition lock or remove it.
- To activate: press the button.
The indicator lamp in the
button lights up.
- To deactivate: press the
button.
The indicator lamp in the
button goes out.
Residual heat is deactivated
automatically:
- after about 30 minutes
- when the ignition is switched on
- if the battery voltage drops
- if the coolant temperature is too low
See also:
Securing the vehicle to prevent it from rolling away
WARNING
Only jack up the vehicle on level ground or on
slight inclines/declines. The vehicle could
otherwise fall off the jack and injure you or
others.
If your vehicle is equipped with a wh ...
Attaching the cargo net
Cargo net attached behind the C-pillar
► Insert guide rod 2 into retainer 1 in
the
direction of the arrow.
► Slide guide rod 2 forwards into
retainer 1 in the direction of the arro ...