Setting the air distribution

Front control unit:

vents. Directs air through the center vents.
footwell air vents Directs the airflow through the footwell air vents
center and footwell vents. Directs the airflow through the center and footwell vents.
defroster vents Directs the airflow through the defroster vents
defroster and center vents Directs the airflow through the defroster and center vents
footwell and defroster vents Directs the airflow through the footwell and defroster vents
defroster, center and footwell air vents Directs the airflow through the defroster, center and footwell air vents

Rear control panel:

rear Directs the airflow through the rear center and rear side air vents.
footwell air vents Directs the airflow through the footwell air vents

Using the rear control panel, you can also Using the rear control panel, you can also activate both air distribution positions simultaneously. In order to do this, press both air distribution buttons. The air is then routed through all rear air vents.

Regardless of the air distribution setting, Regardless of the air distribution setting, airflow is always directed through the side air vents. The side air vents can only be closed when the controls on the side air vents are turned downwards.

- Turn the SmartKey to position 2 in the ignition lock.
- Front control panel: press the button repeatedly until the desired symbol button repeatedly until the desired symbol appears in the display.
- Rear control panel: press the and/or button. and/or Setting the airflow button.

    See also:

    Cleaning the trailer tow hitch
    The ball coupling must be cleaned if it becomes dirty or corroded. Remove rust on the ball of the ball coupling, e.g. with a wire brush. Remove dirt with a clean, lint-free cloth or a brush. A ...

    Setting the side air vents
    To open/close: turn thumbwheel 3 up or down. Side window defroster vent 1 is never completely shut, even if side air vent 2 is shut. ...

    Activating the rear view camera
    Make sure that the SmartKey is in position 2 in the ignition lock. Make sure that the "rear view camera" function is selected in COMAND (see the separate operating instructions for C ...