Replacing the rear window wiper blade
Removing the wiper blade
WARNING
The wiper arm could be set in motion and
injure you if the wiper is switched on.
Remove the key from the ignition lock before
replacing the wiper blade.
- Remove the SmartKey from the ignition
lock.
- Fold wiper arm 1 away from the rear
window until it engages.
- Position wiper blade 2 at a right angle to
wiper arm 1.
- Hold wiper arm 1 and press wiper
blade 2 in the direction of the arrow until
it releases.
- Remove wiper blade 2.
Installing the wiper blade
- Place new wiper blade 2 onto wiper arm 1.
- Hold wiper arm 1 and press wiper blade 2 in the opposite direction to the arrow until it engages.
- Make sure that wiper blade 2 is seated correctly.
- Position wiper blade 2 parallel to wiper arm 1.
- Fold wiper arm 1 back onto the rear window.
See also:
Clearing the memory of the integrated garage door opener on the rear-view
mirror
Turn the SmartKey to position 2
in the
ignition lock.
Press transmitter buttons 2 and
4.
The indicator lamp lights up yellow.
Press and hold transmitter buttons
2
and 4 until the indic ...
Override feature for the rear side windows
WARNING
When children ride on the vehicle's rear seats,
activate the override switch. Otherwise, the
children could be injured, e.g. by trapping
themselves in the rear side window.
To act ...
Introduction
SRS consists of:
the SRS warning lamp
air bags
air bag control unit (with crash sensors)
Emergency Tensioning Devices
belt force limiters
SRS reduces the risk of occupants coming into ...