Changing the windshield wiper blades
Removing the wiper blades
- Remove the SmartKey from the ignition lock.
- Fold the wiper arm away from the windshield.
- Firmly press release knob 1 and pull the wiper blade upwards from the wiper arm in the direction of the arrow.
Installing the wiper blades
- Position the new wiper blade in the retainer
on the wiper arm and slide it into place in
the opposite direction to the arrow.
The wiper blade audibly engages.
- Make sure that wiper blade is seated
correctly.
- Fold the wiper arm back onto the
windshield.
See also:
Rear fog lamp
•► To switch on the rear fog lamp: turn the
SmartKey in the ignition lock to position 2
or start the engine.
•► Turn the light switch to
or or
.
If the light switch is set to ...
Sunblinds on the rear side windows
To extend: pull the
roller sunblind out by
tab 1 and hook it onto retainers 2 at the
top of the window.
Always guide the roller sunblind
by hand.
Do not let it snap back suddenly as this ...
Windows fogged up on the inside
Activate the cooling with air dehumidification function
.
Activate automatic mode .
If the windows continue to fog up, activate the defrosting function ().
You should only select this s ...