High-beam headlamps (halogen headlamps)
- Switch off the lights.
- Open the hood.
- Turn housing cover 1 counter-clockwise
and pull it out.
- Pull lever 3 upwards and remove bulb
holder 2.
- Take the bulb out of bulb holder 2.
- Insert the new bulb into bulb holder 2.
- Simultaneously press bulb holder 2 and
pull lever 3 downwards.
- Align housing cover 1 and turn it
clockwise until it engages.
See also:
Opening/closing automatically from
inside
WARNING
Maintain sight of the area around the rear of
the vehicle while operating the tailgate with
the door-mounted remote tailgate switch.
Monitor the opening procedure carefully to
make su ...
Vehicles with a TIREFIT kit
– Lift the trunk floor up.
1 Lug wrench
2 Jack
3 Tire sealant filler bottle
4 Alignment bolt
5 Tire inflation compressor
6 Folding wheel chock
7 Warning triangle
8 Ratchet wrench
9 Towing ...
Entering characters in the address and the phone book
Introduction
The following section describes how to enter
characters in the phone book/address book
when creating a new entry.
Creating a new entry in the phone book
Call up the input menu wit ...