Low-beam headlamps (halogen headlamps)

- Remove the cover in the front wheel arch.

- Remove the cover in the front wheel arch.
- Turn housing cover 1 counter-clockwise and pull it out.
- Turn bulb holder 2 counter-clockwise and pull it out.
- Take the bulb out of bulb holder 2.
- Insert the new bulb into bulb holder 2.
- Insert bulb holder 2 into the lamp and turn it clockwise.
- Align housing cover 1 and turn it clockwise until it engages.
- Replace the cover in the front wheel arch.

    See also:

    Blind Spot Assist
    Important safety notes Blind Spot Assist uses a radar sensor system to monitor the areas on both sides of your vehicle. It supports you from speeds of approximately 20 mph (30 km/h). A warning ...

    Introduction
    Mercedes-Benz recommends that you use genuine Mercedes-Benz parts, conversion parts and accessories that have been approved for the type of vehicle. Mercedes-Benz tests genuine parts as well as co ...

    Tire characteristics
    Tire data is vehicle-specific and may deviate from the data in the example. This information describes the tire cord and the number of layers in sidewall 1 and under the tread 2. ...