Storing settings
With the memory function, you can store up to three different settings, e.g. for three different people.
The following settings are stored as a single
memory preset:
- position of the seat, backrest and head
restraint
- driver's side: steering wheel position
- driver's side: position of the exterior
mirrors on the driver's and front-passenger
sides
WARNING
Do not activate the memory function while
driving. Activating the memory function while
driving could cause the driver to lose control
of the vehicle.
- Adjust the seat.
- On the driver's side, adjust the steering
wheel and the exterior mirrors.
- Press memory button M and one of the
storage position buttons 1, 2 or 3 within
three seconds.
The settings are stored in the selected preset position. A tone sounds when the settings have been completed.
See also:
Special seat belt retractor
All seat belts except the driver's seat belt are
equipped with a special seat belt retractor.
When activated, the special seat belt
retractor ensures the seat belt will not
slacken once the chi ...
Important safety notes
WARNING
COMAND is classified as a Class 1 laser
product. You must not open the casing. If you
open the casing, or if the casing is faulty or
damaged, there is a risk of exposure to
invisibl ...
Problems with the cooling with air
dehumidification function
When you press the button, the
indicator lamp in the button flashes three
times or remains off. You can no longer switch
on the cooling with air dehumidification
function.
- Consult a qualif ...