Opening and closing

Overhead control panel
Overhead control panel

1 To raise
2 To open
3 To close/lower

The panorama roof with power tilt/sliding panel can only be operated when the roller sunblind is open.
- Turn the SmartKey to position 1 or 2 in the ignition lock.
- Push or pull the switch in the switch in the corresponding direction.

If you press the switch beyond the switch beyond the point of resistance, an automatic opening/closing process is started in the corresponding direction. You can stop automatic operation by operating the switch again.
When raising the roof, automatic operation is only available if the sliding sunroof is in the closed position.

    See also:

    Activating/deactivating climate control
    Important information WARNING When the climate control system is deactivated, the outside air supply and circulation are also deactivated. Only choose this setting for a short time. Otherw ...

    Important safety notes
    WARNING The PARKTRONIC is a supplemental system. It is not intended to, nor does it replace, the need for extreme care. The responsibility during parking and other critical maneuvers always r ...

    Adjusting the volume
    Adjusting the volume for the audio or video source Adjusting the volume for the audio or video source To adjust: turn thumbwheel 1. or Press the or button on the multifunction steer ...