Activating
- To open the tailgate: pull the handle on
the tailgate.
- To stop the opening procedure at the
desired position: press the closing button
in the tailgate or pull the handle
on the outside of the tailgate again.
- To store the position: press and hold the
closing button in the tailgate until you hear
a short tone.
The opening angle limiter is activated. The
tailgate will now stop in the stored position
when opening.
See also:
Switching on/off
The three red indicator lamps in the button
indicate the heating level you have selected.
If the battery voltage is too low, the seat
heating may switch off.
Driver's and front-passenger seat
...
Windshield washer system andheadlamp cleaning system
The washer fluid reservoir is used for both the
windshield washer system and the headlamp
cleaning system.
Vehicle components and their service
products must match. You should, therefore, only ...
Useful information
This Operator's Manual describes
all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differenc ...