Belt warning for the driver and front passenger
Regardless of whether the driver and front passenger have fastened their seat belts already, the7seat belt warning lamp lights up for seconds after every engine start. It then goes out if the driver and the front passenger have fastened their seat belts.
If the driver's seat belt is not fastened after the engine is started, an additional warning tone will sound. The warning tone goes out after approximately six seconds or once the driver's seat belt is fastened.
If the driver or front passenger have not fastened their seat belt after seconds and the doors are closed, the7seat belt warning lamp lights up.
- until the driver or the front passenger have
fastened their seat belts
- if a vehicle speed of 15 mph(25 km/h) is
exceeded once, a warning tone with
increasing intensity sounds additionally for
a maximum of 60 seconds or until the driver
or front passenger have fastened their seat
belts.
If the driver or front passenger undo their seat belts during the journey, the seat belt warning lamp lights up and the warning tone sounds again.
The warning tone ceases even if the driver or front passenger have still not fastened their seat belt after 60 seconds. The seat belt warning lamp stops flashing but continues to be lit.
Once the vehicle is stationary, the warning tone is reactivated and the seat belt warning lamp starts to flash again if the vehicle speed exceeds 15 mph(25 km/h) once.
The seat belt warning lamp only
goes
out if:
- both the driver and the front passenger
have fastened their seat belts.
or
- the vehicle is stationary and a door is open.
For more information on the seat belt warning lamp, see "Warning and indicator lamps in the instrument cluster, seat belt".
See also:
Control panel for dual-zone automatic climate control
1 To set the temperature, left
2 To set climate control to automatic
3 To defrost the windshield
4 To increase the airflow
5 To direct the airflow through the defroster vents
6 To activate/deac ...
Cleaning genuine wood and trimelements
► Wipe the wooden trim and trim pieces
with
a damp, lint-free cloth, e.g. a microfiber
cloth.
► Heavy soiling: use car care and cleaning
products recommended and approved by
Mercede ...
Defrosting the windshield
You can use this function to defrost the
windshield or to defrost the inside of the
windshield and the side windows.
You should only select the defrosting
function until the windshield is clear ...