Seat belt adjustment
The seat-belt adjustment function adjusts the driver's and front-passenger seat belt to the upper body of the occupants.
The belt strap is tightened slightly when:
- you engage the belt tongue in the belt
buckle and you then turn the SmartKey to
position 2 in the ignition lock.
- the SmartKey is in position 2 in the ignition
lock and you then engage the belt tongue
in the buckle.
The seat-belt adjustment will apply a retraction force if any slack is detected between the occupant and the seat belt. Do not hold on to the seat belt tightly while it is adjusting. You can switch the seat-belt adjustment on and off in the on-board computer.
The seat-belt adjustment is an integral part of the PRE-SAFE® convenience function. More information about PRE-SAFE® can be found in the "PRE-SAFE® (preventative occupant protection)" section.
See also:
Important notes
In order to prevent the vehicle's battery from discharging, the interior lighting
functions are automatically deactivated after some time except for when the SmartKey
is in position 2 in the i ...
System self-test
If an adult occupant is properly sitting on the
passenger seat and the OCS classifies the
occupant as an adult, the indicator
lamp illuminates and goes out again after
approximately 6 seconds ...
Adjusting the volume
This function is available for SPLITVIEW and
for the Rear Seat Entertainment System in
conjunction with corded headphones.
Press one of buttons 7 on the remote
control.
The volume of the cu ...