Installing/removing the towing eye
Installing the towing eye
Vehicles with a trailer tow hitch: if possible secure the towing device on the trailer tow hitch.
► Remove the towing eye from the vehicle tool kit.
WARNING
The exhaust tail pipe may be hot. You could
burn yourself if you touch the tail pipe. Be
particularly careful when removing the rear
cover.
The mountings for the removable towing eyes are located in the bumpers. They are at the front and at the rear, under the covers.
► Press the mark on cover 1 inwards in
the
direction of the arrow.
► Take cover 1 off the opening.
► Screw the towing eye in clockwise to the
stop and tighten it.
Removing the towing eye
► Loosen the towing eye and unscrew it.
► Attach cover 1 to the bumper and press
until it engages.
► Place the towing eye in the vehicle tool
kit.
See also:
SmartKey
0 To remove the SmartKey
1 Power supply for some consumers, such as the windshield wipers
2 Ignition (power supply for all consumers) and drive position
3 To start the engine
As soon as the igni ...
Important safety notes
WARNING
Inhalation of exhaust gas is hazardous to your
health. All exhaust gas contains carbon
monoxide (CO), and inhaling it can cause
unconsciousness and possible death.
Do not run the eng ...
Direction of rotation
Tires with a specified direction of rotation
have additional benefits, e.g. if there is a risk
of hydroplaning. You will only gain these
benefits if the correct direction of rotation is
mainta ...