Tire pressure of at least 180 kPa(1.8 bar/26 psi) is not reached

If, after five minutes, a pressure of 180 kPa (1.8 bar/26 psi) has not been achieved:

Press the on/off switch on the tire inflation compressor to 0.

The tire inflation compressor is switched off.

Unscrew the filler hose from the valve of the faulty tire.
Very slowly drive forwards or reverse approximately 30 ft (10 m).
Pump up the tire again.

WARNING If after five minutes a pressure of 180 kPa 
If after five minutes a pressure of 180 kPa (1.8 bar/26 psi) cannot be achieved, the tire is too badly damaged to be repaired reliably using TIREFIT.
In this case TIREFIT cannot seal the tire properly.
Do not drive any further.
Contact the nearest authorized Mercedes-Benz Center for assistance or call Roadside Assistance.

    See also:

    The mbrace system
    The mbrace system provides different services, e.g.:  - automatic and manual emergency call  - Roadside Assistance call  - MB Info call To adjust the volume during an mbrace ...

    Convenience
    Activating/deactivating the EASYENTRY/ EXIT feature You can use the Easy-entry Function to activate or deactivate the EASY-ENTRY/EXIT feature. WARNING   You must make sure no one can b ...

    Important safety notes
    WARNING Never switch off the engine while the vehicle is in motion. There is no brake boost for the service brake if the engine is not running. If the ignition is switched off, there is also ...