Inserting the mounting elements intothe loading rail
You can slide mounting element 2 in loading rail 1 to various detents and secure it. These detents are marked and positioned at 5-cm intervals along loading rail 1.
You can turn mounting element 2 of loading rail : to four positions:
To lock the mounting element
To release the cargo tie-down
ring, the
inertia reel or the telescopic rod
To remove the mounting element
To push the mounting element to
the
next detent
► Turn mounting element 2 to
.
► Insert mounting element 2 into loading
rail 1.
► Turn mounting element 2 to
until
you feel it clearly engage in loading rail 1.
See also:
Switching on Night View Assist Plus
Depending on your vehicle's date of
manufacture, the or
symbol for
the "Automatic driving lights/daytime
running lamps" position is located on the light
switch.
You can only ac ...
Headlamps fogged up on the inside
The headlamps may fog up on the inside if
there is high atmospheric humidity.
•► Drive with the headlamps switched on.
The level of moisture diminishes,
depending on the length of the jour ...
Deactivating/activating ESP® (AMG vehicles)
Activating/deactivating SPORT handling
mode
WARNING
The SPORT handling mode should not be
switched on during normal driving.
Switching on the SPORT handling mode will
result in the followin ...