SmartKey
Display messages
Key Does Not
Belong to Vehicle
Possible causes/consequences and ► Solutions
You have put the wrong SmartKey in the ignition lock.
► Use the correct SmartKey.
Display messages
Remove Key
Possible causes/consequences and ► Solutions
The SmartKey is in the ignition lock.
► Remove the SmartKey.
Display messages
You need a new key.
Possible causes/consequences and ► Solutions
The SmartKey needs to be replaced.
► Visit a qualified specialist workshop.
Display messages
Change Key
Batteries
Possible causes/consequences and ► Solutions
The batteries of the KEYLESS-GO key are discharged.
► Change the batteries.
Display messages
Don't Forget Your
Key
Possible causes/consequences and ► Solutions
The display message is shown for a maximum of 60 seconds and
is only a reminder.
You have opened the driver's door with the engine switched off.
The KEYLESS-GO key is not in the ignition lock.
► Remember to take the KEYLESS-GO key with
you when you
leave the vehicle.
Display messages
Key Not Detected (Red
display message)
Possible causes/consequences and ► Solutions
The KEYLESS-GO key is not in the vehicle.
If the engine is switched off, you can no longer lock the vehicle
centrally or start the engine.
► Pull over and stop the vehicle safely as
soon as possible, paying
attention to road and traffic conditions.
► Engage the parking brake.
► Locate the KEYLESS-GO key.
The KEYLESS-GO key is not detected while the engine is running
because there is interference from a strong source of radio waves.
► Pull over and stop the vehicle safely as
soon as possible, paying
attention to road and traffic conditions.
► Engage the parking brake.
► Operate the vehicle with the SmartKey in
the ignition lock.
Display messages
Key Not Detected (White display
message)
Possible causes/consequences and ► Solutions
The KEYLESS-GO key cannot be detected at present.
► Change the location of the key with the
KEYLESS-GO functions
in the vehicle.
If the KEYLESS-GO key is still not detected:
► Change the location of the key with the
KEYLESS-GO functions
in the vehicle.
► Operate the vehicle with the SmartKey in
the ignition lock.
Display messages
Key Detected in
Vehicle
Possible causes/consequences and ► Solutions
The KEYLESS-GO key has been detected inside the vehicle during
locking.
► Remove the KEYLESS-GO key from the
vehicle.
Display messages
Pull starting
button out then
insert key.
Possible causes/consequences and ► Solutions
The KEYLESS-GO key can continuously not be detected.
► Insert the SmartKey into the ignition lock
and turn it to the
desired position.
► Visit a qualified specialist workshop.
See also:
Engines: new CDI-four-cylinder units with a fuel consumption of just 5.3
litres and 139 grams of CO2 per kilometre
With three completely newly developed four-cylinder engines, the
Mercedes-Benz E-Class also remains one generation ahead where diesel technology
is concerned. These engines feature latest-generati ...
Belt warning for the driver and front
passenger
Regardless of whether the driver and front
passenger have fastened their seat belts
already, the seat belt warning lamp
lights up for 6 seconds after every engine
start. It then goes out if t ...
Fuel requirements
Gasoline engines
Use only premium-grade unleaded gasoline.
The octane number should be at least 91.
Details can be found on the gas pump. The
octane number is the average value of the
Resea ...