Setting a speed
WARNING
Keep in mind that it may take a brief moment
until the vehicle has made the necessary
adjustments.
Increase or decrease the set vehicle speed to
a value that the prevailing road conditions and
legal speed limits permit. Otherwise, sudden
and unexpected acceleration or deceleration
of the vehicle could cause an accident and/or serious injury to you and others.
► Press the cruise control lever to the
pressure point, up 1 for a higher speed or
down 2 for a lower speed.
► Keep the cruise control lever pressed
until
the desired speed is reached.
► Release the cruise control lever.
The new speed is stored.
Cruise control is not deactivated if you
depress the accelerator pedal. For example, if you accelerate briefly to
overtake, cruise control adjusts the
vehicle's speed to the last speed stored
after you have finished overtaking.
See also:
Cleaning the rear view camera
– Use clear water and a soft cloth to clean
camera lens 1.
Do not clean the camera lens and the area
around the rear view camera with a power
washer. ...
Tread wear
The tread wear grade is a comparative rating
based on the wear rate of the tire when tested
under controlled conditions on a specified
U.S. Government test course. For example, a
tire graded 1 ...
Notes on care
Regular care of your vehicle is a condition for
retaining the quality in the long term.
Use care products and cleaning agents
recommended and approved by Mercedes-
Benz.
WARNING
Many cleani ...