Notes on using 3-zone automaticclimate control

The following contains instructions and recommendations to enable you to get the most out of your automatic climate control.

Activate climate control using the buttons. The indicator lamps in the and and buttons. The indicator lamps in the buttons light up. and • Set the temperature to 72 °F (22 °C). buttons light up.
Set the temperature to 72 °F (22 °C).
Only use the "defrosting" function briefly until the windshield is clear again.
Only use "air-recirculation" mode briefly, e.g. if there are unpleasant outside odors or when in a tunnel. The windows could otherwise fog up as, in air-recirculation mode, no fresh air is drawn into the vehicle.
Use the MONO function if you want to adopt the temperature and air distribution settings from the driver's side for all climate zones. The indicator lamp in the • Use the residual heat function if you want button lights up.
Use the residual heat function if you want to heat or ventilate the vehicle interior when the ignition is switched off. The "residual heat" function can only be activated or deactivated with the ignition switched off.

    See also:

    Adjusting the backrest angle (2nd rowof seats)
    WARNING   The seat belt only offers its intended protection when the seat backrest is in a nearly vertical position and the occupant is sitting upright. The seat backrest and seat belt ...

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are ...

    Hill start assist
    Hill start assist helps you when pulling away forwards or in reverse on an uphill gradient. It holds the vehicle for a short time after you have removed your foot from the brake pedal. This gives ...