High-beam headlamps
► Switch off the lights.
► Open the hood.
► Turn housing cover 1
counter-clockwise
and pull it out.
► Turn bulb holder 2
counter-clockwise and
pull it out.
► Take the bulb out of bulb holder
2.
► Insert the new bulb into bulb holder
2.
► Insert bulb holder 2
into the lamp and turn
it clockwise.
► Align housing cover 1
and turn it
clockwise until it engages.
See also:
Warning displays
The warning displays show the distance
between the sensors and the obstacle. The
warning display for the front area is located
on the dashboard above the center air vents.
The warning display fo ...
Entering a destination from the list of
last destinations
To activate navigation mode: press the
function button once or twice.
To show the menu: press
the COMAND
controller.
Select Destination in the navigation
system menu bar by turning t ...
Problems with the seat heating
The seat heating has switched off
prematurely or cannot be switched on. The
vehicle's electrical system voltage is too low
because too many electrical consumers are
switched on.
•► Swit ...