Turn signals
1 High-beam headlamps
2 Right turn signal
3 High-beam flasher
4 Left turn signal
► To indicate briefly: press the combination switch briefly to the pressure point in the direction of arrow 2 or 4.
The corresponding turn signal flashes three times.
► To indicate: press the combination switch beyond the pressure point in the direction of arrow 2 or 4.
► To switch on the high-beam headlamps:
turn the SmartKey in the ignition lock to position 2 or start the engine.
► Turn the light switch to .
► Press the combination switch beyond the pressure point in the direction of arrow 1.
The indicator lamp in the instrument cluster lights up.
► To switch off the high-beam headlamps: move the combination switch back to its normal position.
The indicator lamp in the instrument cluster goes out.
See also:
Important information
The cooling with air dehumidification function
is only available when the engine is running.
The air inside the vehicle is cooled and
dehumidified according to the temperature
selected.
WARNI ...
Roof carrier
Important safety notes
WARNING
Only use carriers when the crossbars have
been completely mounted. The left and right
roof rails are only stabilized by means of the
crossbars mounted.
...
Lights
Switching the daytime running lamps on/
off
This function is not available in Canada.
If you have activated the Day Lights
function and the light switch is in the
or
position, the daytime r ...