PRE-SAFE® (preventative occupantprotection)
WARNING
The PRE-SAFE® system reduces the impact of
an accident on vehicle occupants, as long as
their seat belts have been fastened correctly.
Although your vehicle is equipped with a PRESAFE
® system, the possibility of injury in the
event of an accident cannot be ruled out. You
should therefore always drive carefully and
adapt your driving style to the prevailing road,
weather and traffic conditions.
PRE-SAFE® takes preemptive measures to protect occupants in certain hazardous situations.
PRE-SAFE® intervenes:
• in emergency braking situations when BAS
intervenes
• in critical driving situations, e.g. when
physical limits are exceed and the vehicle
understeers or oversteers severely PRE-SAFE® takes the following measures
depending on the hazardous situation
detected:
• the front seat belts are
pre-tensioned.
• on vehicles with memory function for the
front-passenger seat: the front-passenger
seat is adjusted if it is in an unfavorable
position.
• if the vehicle skids, the side windows are
closed so that only a small gap remains.
• on vehicles with a sliding sunroof: if the
vehicle skids, the sliding sunroof closes so
that only a small gap remains.
If the hazardous situation passes without resulting in an accident, PRE-SAFE® slackens the belt pretensioning. All settings made by PRE-SAFE® can then be reversed.
If the seat belts are not released:
Move the backrest or seat back slightly, but only when the vehicle is stationary.
The belt pretensioning is reduced and the locking mechanism is released.
WARNING
Make sure that nobody can become trapped
as you adjust the seat.
Make sure that there are no objects in the footwell or behind the seats when resetting the seats. There is a risk that the seats and/or the objects could be damaged.
More information about seat-belt adjustment, a convenience function integrated into PRE-SAFE®, can be found in the "Seat-belt adjustment" section.
See also:
Treadwear indicators
Narrow bars (tread wear bars) that are
distributed over the tire tread. If the tire tread
is level with the bars, the wear limit of 1/16 in
(1.6 mm) has been reached. ...
Activating/deactivating the residual heat function
It is possible to make use of the residual heat of the engine to continue heating
the stationary vehicle for up to 30 minutes after the engine has been switched off.
The heating time depends on th ...
Immobilizer
The immobilizer prevents your vehicle from
being started without the correct SmartKey.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. The
engine can be starte ...