Checking tire pressure manually
To determine and set the correct tire pressure, proceed as follows:
- Remove the valve cap of the tire that is to be checked.
- Press the tire pressure gauge securely onto the valve.
- Read the tire pressure and compare it with the recommended value on the Tire and Loading Information placard on the B-pillar on the driver's side of your vehicle.
- If necessary, increase the tire pressure to the recommended value ().
- If the tire pressure is too high, release air by pressing down the metal pin in the valve using the tip of a pen, for example. Then check the tire pressure again using the tire pressure gauge.
- Screw the valve cap onto the valve.
- Repeat these steps for the other tires.
See also:
Basic telephone menu (Bluetooth® interface)
To call up the telephone menu: press the
function button once or twice.
If the mobile phone is ready for use, the
following display appears:
Example display: telephone basic menu (Bluetooth® ...
Useful information
This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences are ...
Cleaning the display
– Before cleaning the display, make sure that
it is switched off and has cooled down.
– Clean the display surface using a
commercially-available microfiber cloth
and TFT/LCD display cleaner.
– ...