Fuse box in the engine compartment
- Make sure that the windshield wipers are turned off.
WARNING
Make sure that the windshield wipers are switched off and that the SmartKey is removed from the ignition lock before you open the cover of the fuse box. Otherwise, the windshield wipers and the wiper rods above the cover could be set in motion. This could lead to you or others being injured by the wiper rods.
- Open the hood ().
- Remove any existing moisture from the fuse box using a dry cloth.
- Take lines 2 from the guides.
- To open: open clamps 1.
- Remove the fuse box cover forwards.
Make sure that no moisture can enter the fuse box when the cover is open.
- To close: check whether the rubber seal is lying correctly in the cover.
- Insert the cover at the rear of the fuse box into the retainer.
- Fold down the cover and close clamps 1.
- Secure lines 2 in the guides.
The cover must be seated properly, otherwise moisture or dirt could impair the function of the fuses.
- Close the hood ().
See also:
Additives
Do not use any additives in the engine oil. This could damage the engine. ...
Matte finish care
If your vehicle has a clear matte finish,
observe the following instructions in order to
avoid damage to the paintwork due to
incorrect care.
These notes also apply to light alloy wheels
with ...
M-Class in the Market
Automakers have a fascination with sportiness, even to the point of giving
minivans and pickup trucks a performance slant. The SUV segment has likewise
been touched by this phenomenon, and some of ...