Important safety notes
WARNING
If you tow the vehicle, you must use a rigid towing bar if:
- the engine is not running.
- there is a brake system malfunction.
- there is a malfunction in the power supply or the vehicle's electrical system.
The power assistance for the steering and the brake force booster do not work when the engine is not running. You will need more force to steer and brake, you may have to depress the brake pedal with maximum force.
Before towing away, make sure that the steering can be moved and is not locked. If you tow or tow-start another vehicle, its weight must not exceed the maximum permissible gross vehicle weight of your vehicle.
It is better to have the vehicle transported than to have it towed.
You may only tow the vehicle a maximum distance of 30 miles (50 km). A towing
speed of 30 mph (50 km/h) must not be exceeded.
For towing distances over 30 miles (50 km), the vehicle must loaded onto a transporter.
Only secure the tow rope or tow bar at the towing eyes. Otherwise, the vehicle
could be damaged.
Do not use the towing eye for recovery, as this could damage the vehicle. If
in doubt, recover the vehicle with a crane.
When towing, pull away slowly and smoothly. If the tractive power is too high,
the vehicles could be damaged.
Do not tow with sling-type equipment. This could damage the vehicle.
On vehicles with KEYLESS-GO, use the SmartKey instead of the Start/Stop button.
Turn the SmartKey to position 2 in the ignition lock and shift the automatic transmission
to N. Then, turn the SmartKey back to 0 and leave it in the ignition lock.
The automatic transmission must be in position N when the vehicle is being towed.
The battery must be connected and charged. Otherwise, you:
- cannot turn the SmartKey to position 2 in the ignition lock
- cannot shift the automatic transmission to position N
Release the selector lever lock manually to move it out of position P().
Before the vehicle is towed, switch off the automatic locking feature (). You could otherwise be locked out when pushing or towing the vehicle.
See also:
Lowering the vehicle
► Place the ratchet wrench onto the
hexagon
nut of the jack so that the letters AB are
visible.
► Turn the ratchet wrench until the vehicle
is
once again standing firmly on the gro ...
Adjusting the front-passenger seat from the driver's seat
WARNING
When adjusting the front passenger seat,
make sure the seat, if occupied, is as far from
the front passenger front air bag as possible.
Otherwise, the passenger could be seriously
...
Dynamic function
The dynamic function adjusts the air cushions
in the side bolsters of the seat backrests to
ensure ideal lateral support at all times.
You can choose between two different levels.
Level 1 ...