Preparing the cargo net
The cargo net can be used in two different positions (behind the B-pillar or the C-pillar).
- The brackets behind B-pillar : are required for the cargo compartment enlargement (). The corresponding cargo tie down rings to tighten the net are located in the footwell of the rear bench seat ().
- The brackets behind C-pillar ; are required for the cargo compartment behind the rear bench seat.
The corresponding cargo tie down rings to tension the net are located in the cargo compartment ().
The cargo net is located in the loading tray in the stowage well under the trunk floor ().
- Open both Velcro fasteners and remove the cargo net.
- Unroll and unfold the cargo net. The upper and lower guide rods must engage audibly.
See also:
Safety systems
Display messages
Possible causes/consequences and
Solutions
Risk of accidentABS (Anti-lock Braking System), ESP®
(Electronic Stability Program), BAS (Brake Assist), PRE ...
Vehicle tool kit
The vehicle tool kit can be found in the
stowage well under the trunk floor.
Lift the trunk floor up.
1 Vehicle tool kit tray
2 Stowage well
3 Spare wheel/"Minispare" emergenc ...
Adjusting the multicontour seat in the rear compartment
You can use the buttons on the center
console to adjust the multicontour seats for
the outer seats in the rear compartment.
To select a rear-compartment seat: push
or pull rocker switch 1 or ...